Voltage Controlled Phase Shifter, Frequency Range 3-12GHz, Phase Shift Range ≥ 360 °

Voltage controlled phase shifter is a device that changes the phase of RF signals by controlling the voltage. The following is a detailed introduction to voltage controlled phase shifters:

Characteristics

1. Wide range of phase adjustment: It can provide 180 degree and 360 degree phase adjustment, which can meet various complex application requirements.
2. Simple control method: DC voltage is generally used to control the phase, and the control method is simple.
3. Fast response speed: Able to quickly respond to changes in control voltage and achieve rapid phase adjustment.
4. High phase accuracy: It can accurately control the phase and meet the requirements of high-precision applications.

Application

1. Communication system: Used for phase modulation and demodulation of signals to improve the transmission quality and reliability of signals.
2. Radar system: Implement beam scanning and phase modulation to improve the detection and anti-interference capabilities of the radar.
3. Smart antenna system: Used to control the beam direction of the antenna and achieve dynamic adjustment of the beam.
4. Electronic warfare system: Used for phase control of signals in electronic warfare to achieve tactical objectives such as interference and deception.
5. Testing and measurement: Used in RF microwave testing to precisely control signal phase and improve testing accuracy.
6. Aerospace engineering: Used for phase control and adjustment of signals in aerospace communication and radar systems.

Qualwave Inc. provides low loss voltage controlled phase shifters ranging from 0.25 to 12GHz, widely used in transmitters, instruments, laboratory testing, and wireless communication fields.
This article introduces a voltage controlled phase shifter with a frequency range of 3-12GHz and a phase shift range of 360 °. View datasheet: QVPS360-3000-12000

1.Electrical Characteristics

Frequency: 3~12GHz
Phase Range: 360° min.
Insertion Loss: 6dB typ.
Phase Flatness: ±50° max.
Control Voltage: 0~13V max.
Current: 1mA max.
VSWR: 3 typ.
Impedance: 50Ω

2.Mechanical Properties

Size*1: 20*28*8mm
0.787*1.102*0.315in
RF Connectors: SMA female
Mounting: 4-Φ2.2mm through-hole
[1]Exclude connectors.

3.Environment

Operation Temperature: -45~+85℃
Non-Operation Temperature: -55~+125℃

4.Outline Drawings

Unit: mm [in]
Tolerance: ±0.5mm [±0.02in]

5.Absolute Maximum Ratings*2

RF Input Power: 20dBm
Voltage: -0.5~18V
ESD Protection Level (HBM): Class 1A
[2]Permanent damage may occur if any of these limits are exceeded.

6.Typical Performance Curves

7.How To Order

QVPS360-3000-12000

Qualwave Inc. committed to quality, innovation, and seamless service. Welcome to call for consultation.